glass fibre plate NRC 0.95 CAC44

DEGOPhon™ fiberglass boards is made in CHINA 60 mm thick high sound absorbing and thermal insulating Glass fibre ceilings panel.  

Ceiling Tiles are available in a wide range of decorative finishes and are

designed to provide R2.2 thermal insulation and exceptional low, mid and high frequency sound absorption. 

Degophon glass fibre reinforced panels bright classic sound-absorbing ceiling .

The Fiberglass Ceiling wool core material, goodSound absorption and fire performance, Installed in the Metal Suspended Ceiling grid system T24.

Acoustic glass fibre plate help to reduce excess noise within a space and help stop sound from travelling between rooms.

High NRC up to 0.85, Class A2 fire-class, recycled 77%,RH99 Moisture resistance Application areas.

sound-absorbing system ceilings, acoustic conditioning andnoise reduction in various types of buildings

such as offices, schools, kindergartens, stores, etc.

                     Composition: 

Manufactured in CHINA from 50 mm 48 kg/m³ bio-soluble glass fibre Sonaris

 core with  10mm plasterboard attenuator backer, 320 gsm  Sonatex acoustic laminate finishes.

Features & Benefits: 

 • Very high sound absorption, NRC 0.95, ∂W 1.0 to reduce

background noise and reverberation times. 

 • High mass attenuator backer, STC 20 dB, CAC 44 to

attenuate rain noise under metal roofs, plenum

 noise and room to room  attenuation over partition heads. 

• Ministry of Education DQLS V3.1 2024 approved solution.

 • Fire Group 1-S.

 • Broad range of Sonatex and Sonaris perforated acoustic   

 laminate finishes for design freedom.

 • Service panels available to order with temporary foil overlay,    

designed to protect the decorative finish on site during         

  installation, remove prior to hand over. 

 • Made in CHINA, short lead times including replacement parts.

 • Packaging take back and reuse scheme available (CHINA only). 

• Product stewardship renew and reuse program. 

 • GreenTag Certified / Level A, low VOC, core contains 80%  recycled

 post consumer waste glass.

Shall not commence until the building is watertight and dry. 

This product is designed to be mounted into a two-way   

exposed grid system and installed to manufacturer’s and AS/CHINAS 2785:2020 Standard’s

 requirements. Seismic design may require a suitably qualified engineer. 

Hold down clips may be required in areas of wind uplift, 

and/or air grilles used to balance air pressure. 

Care shall be taken when   handling tiles to avoid damage.